Cette machine est vendue
Presse hydraulique Talurit - 006-17
Hydraulic Swager 600T wire rope splicing press MACH-ID 6918| Marque: | Talurit |
| Taper: | 006-17 |
| Année: | 2012 |
Capacity T-Ferrules T34 / T42Capacity STS 30 / STS 42Flemish Eye 1 1/2"Die set block size 110 x 156New price EUR 75.000
Caractéristiques
Force
600
600
Passage entre montants
250 mm
9.843 inch
Table Length
200 mm
7.874 inch
Table Width
160 mm
6.299 inch
Puissance moteur
7.5 kW
7.5 kW
Dimensions (Estimation)
Longueur
2160 mm
85.039 inch
Largeur
720 mm
28.346 inch
Hauteur
1920 mm
75.59 inch
Poids
4440 kg
9793 lbs
Important : les informations sur cette page ont été obtenues au meilleur de nos connaissances auprès des fabricants. L'exactitude n'est pas garantie mais les informations sont données de bonne foi. En conséquence, cela ne constitue pas une représentation ou des conditions contractuelles. Nous vous recommandons de vérifier tous les détails essentiels !
TALURIT 600T swager is an all-round swager consisting of a single block construction. It is designed for convenient long-hour swaging operations suitable for both Flemish Eye, turnback and swage terminals. The machine generates a low sound during the swaging process, which contributes to an operator friendly working station. The smart foot pedal control allows the operator to use both hands when concentrating on the swaging procedure. In addition to the standard up/down function, the foot control can activate a hold-function, which keeps the die sets in place, giving the operator time to facilitate rope or sling eye adjustment as well as making the making tool set-up quicker.With the pressure gauge, it is possible to preset the required pressure and get the die set to open automatically once this pre-set pressure is reached. Saving production cycle time and reducing operator movements and wear of the dies.The retraction length of the bottom die can be adjusted by the timer function. The hydraulic unit shuts down after an adjustable idle time and can be started again by just pressing the foot control. This energy saving feature is also in addition reducing the already low noise level. its a good choice for achieving efficiency in your workshop. Due to its single pillar open throat design you will have good accessibility to the working area and with the extended T-panel you will have superior control of the swaging operation. The sturdy design ensures a long service lifetime and minimal maintenance.Key benefits:
- Reliable – The robust resign ensures long service lifetime, at high strength with minimal maintenance.
- All-round – Standard configuration with guides makes this machine suitable for many types of swaging-operations.
