Этот станок продан
Фланжировочный станок SMT Schleifstein - KBoL 2010-200
MACH-ID 7373| Производитель: | SMT Schleifstein |
| Тип: | KBoL 2010-200 |
| Контроль: | Playback |
| Год выпуска: | 2002 |
- CNC Controll MIPC Q Playback with GAP control
- Large package TOP rolls 5 units
- Large package forming & pressure rolls 5 units
- Loading attachment
- Unloading attachment
- Under power out put 6 units
- Controllable forming roll drive
- Hydraulic displacement drive
- Clamping device without hole
- Basket bottem
- Knocker bottom
- Pressure vessel bottom
- Boiler bottoms
- Flat floor
- Plate base
- diffuser bottom
- Tank bottom
- Tank bottom
- Radar reflectors
- Engine parts
- Dispense air
- Silo hoppers
- Cooker hoods
- Container parts
- Hemispheres
Спецификации
Размеры (Оценивать)
Обратите внимание: Информация на странице была получена по мере наших возможностей от производителей, где это возможно.Она размещена добросовестно, но ее точность не может быть гарантирована. Соответственно, это не является показателем или договорными условием. Мы советуем уточнить все спецификации!
Head manufacturing lines for precise production of tank
and vessel heads
Step-by-step, partial forming (dishing) of
the round to form a dished disk,on a hydraulic dishing unit, consisting of a press with
manipulator.
Bending (flanging) the edge of the dished
disk to guarantee that there is no clear-cut
to the cylindric tank,on a flanging machine.
We are the pioneers for these production
procedures and have been dealing with the
improvement of the production lines and
processes for decades:
• increase of the repetitive accuracy
• decrease of production times
• reduction of personnel costs
• reduction of production material costs
• increase of production quality
• automation of production
• conversion of operator know-how into
control know-how of the machine
As outstanding characteristics of our machines only two examples are highlighted here:
PLAYBACK-Control for the dishing units.
Automatic setting to a new round diamter
in less than 3 minutes.
Electronic Gap Control for the flanging
machine. Automatic and material-friendly
running along the forming roll contour with
a specified distance to the pressure roll.
Apart from using the latest controls you can
rely on the familiar Schleifstein-quality. We
also guarantee the well-known longevity
and high availability of Schleifstein-machines by our worldwide service.
Specify your application to us and we will
find an appropriate sol
