Dit is gelijk aan:
Deze machine is gereserveerd
5 assige bewerkingscentrum DMG MORI - DMF 260-7
MACH-ID 9609| Merk: | DMG MORI |
| Type: | DMF 260-7 |
| Besturing: | HeidenHain iTNC530 |
| Bouwjaar: | 2012 |
- Pendel screen to split working area
- C1 + C2 Duo (NC) Rotary table Ø 750 mm
- Rotation speed table 50 Rpm indexing 360 Degrees
- Paper filter with IKZ 40 Bar
- Rapid feeds in all direction 20.000 mm/Min
- Work load 8000 Kg
- Spindel (cutting) hours 8295 H
Specificaties
Afmetingen (Schatting)
Belangrijk: De informatie op deze pagina is naar beste vermogen en overtuiging verkregen en waar nodig verkregen van de fabrikanten.De nauwkeurigheid kan niet worden gegarandeerd maar de informatie wordt te goeder trouw gegeven. Dienovereenkomstig vormt het geen vertegenwoordiging of contractuele voorwaarden.We raden u aan om alle essentiële details te controleren!
Dit is gelijk aan:
What it’s used for (why 2 tables?)
1. Continuous production (very important)
- While part A is being machined,
- The operator can load/unload part B on the second table
👉 This is called pendulum machining (or twin setup)
✔ reduces downtime
✔ increases productivity a lot
2. Machine two parts at once
- Same program can run on both tables
- Ideal for batch production
3. Flexible setups
- One table: small parts
- Other table: large or different part
4. Full 5-axis machining
Combined with:
- B-axis spindle (tilting head)
- C-axis rotary tables
You get full multi-angle machining in one setup
Example specs (with rotary table)
- Table diameter: ~750 mm
- Rotation: 360° continuous
- Load: up to ~500–2000+ kg depending on setup
Typical industries using Duo rotary setup
Same as standard DMF—but more production-focused:
Aerospace
- Multiple identical components (brackets, housings)
Automotive
- Series production of engine parts
Tool & mold making
- Run 2 molds alternately
General machining shops
- High-mix production with minimal downtime
Jobs that use this setup
- CNC operator → loads one table while other runs
- CNC programmer → programs twin setups / mirrored cycles
- Production engineer → optimizes cycle time
Simple explanation
👉 A DMF 260/7 with Duo NC rotary table is:
“A large 5-axis CNC machine that can rotate TWO parts and work on them alternately or simultaneously to save time.”
Why companies pay extra for this option
Because it:
- Cuts idle time almost to zero
- Doubles throughput in some cases
- Makes the machine much more efficient
