Deze machine is verkocht
Center draaibank WALDRICH SIEGEN - HB 4500 x 100 NC x 6000
MACH-ID 539| Merk: | WALDRICH SIEGEN |
| Type: | HB 4500 x 100 NC x 6000 |
| Bouwjaar: | 1977 |
Specificaties
Afmetingen (Schatting)
Belangrijk: De informatie op deze pagina is naar beste vermogen en overtuiging verkregen en waar nodig verkregen van de fabrikanten.De nauwkeurigheid kan niet worden gegarandeerd maar de informatie wordt te goeder trouw gegeven. Dienovereenkomstig vormt het geen vertegenwoordiging of contractuele voorwaarden.We raden u aan om alle essentiële details te controleren!
Make : Waldrich – Siegen - Germany
Type : HB 4500 x 100 NC x 6000
Age : 1977
No : 16040
Minimum turning Ø : 320
Maximum turning Ø : 4.500
Max. travel X on bed : 6.000
Work piece load : 100.000 KG
Boring bar bed width : 1.900
2 bed way Bed length : 9.000
Drive power : 75 kW
Speed 1 drive: 0,5 – 9 – 32 Rpm
Speed 2 drive: 1,6 – 30 – 104 Rpm
Torq on boring bar 7.000 kpm
Feed in X travel : 0,05 – 100 mm/min.
Rapid in X travel: 100 – 3.000 mm/min.
Travel boring bar on bed : 3.500 mm
Guiding Hydrostatic
Drive facing job feed: 0,05 – 50 mm/min.
Drive facing job rapid: 50 – 300 mm/min.
Boring bar Ø 450
Inside Ø : 325
Length : 13.900
Split able in 2 pieces
2 drives
To 1e drive = 4.900 to 2e drive from 1e = 3.000
Boring bar Ø 300
Inside Ø : 205
Length : 12.400
Split able in 2 pieces
2 drives
To 1e drive = 4.400 to 2e drive from 1e = 2.500
Fixed Boring bar steady rest on X travel bed
Length : 660
4 x hydrostatic ring bearing
2 x ring support bar Ø 450 + Ø 300
Travel on lower bed : 3.700 mm
Travelling speed : 1.000 mm/min.
Movable Boring bar steady rest II
Length : 1.200
4 x hydrostatic ring bearing
2 x ring support bar Ø 450 + Ø 300
Travel on lower bed : 3.700 mm
Travelling speed : 1.000 mm/min.
Movable Boring bar steady rest III
Length : 660
2 x hydrostatic ring bearing
2 x ring support bar Ø 450 + Ø 300
Travel on lower bed : 1.000 mm
Travelling speed : 1.000 mm/min.
2 Guide way Bed for steady rest II & III
Bed width : 2.600
Length : 7.000
Thickness : 400
Int. Boring bar heads for Ø 450 No.1
Tool holder 1 460 – 640
Tool holder 2 540 – 720
Tool holder 3 620 – 800
Stroke max. 90
Int. Boring bar heads for Ø 450 No.2
Tool holder 1 780 – 1.020
Tool holder 2 860 – 1.100
Stroke max. 120
Int. Boring bar heads for Ø 450 No.3
Tool holder 1 1.020 – 1.420
Tool holder 2 1.100 – 1.500
Stroke max. 200
Ext. Boring bar heads for Ø 450 No.4
Tool holder 1 1.450 – 1.850
Tool holder 2 1.800 – 2.200
Stroke max. 200
Ext. Boring bar heads for Ø 450 No.5
Tool holder 1 2.150 – 2.950
Tool holder 2 2.500 – 3.300
Stroke max. 400
Int. Boring bar heads for Ø 300 No.1
Tool holder 1 310 – 430
Tool holder 2 390 – 510
Tool holder 3 470 - 590
Stroke max. 60
Int. Boring bar heads for Ø 300 No.2
Tool holder 1 680 – 780
Tool holder 2 660 - 860
Stroke max. 100
Int. Boring bar heads for Ø 300 No.3
Tool holder 1 840 – 1.220
Tool holder 2 920 – 1.300
Stroke max. 190
Ext. Boring bar heads for Ø 300 No.4
Tool holder 1 1.250 – 1.650
Tool holder 2 1.600 – 2.000
Stroke max. 200
Many boring bar tool Quadratics
Rebuild to NCT in ca. 2000
Precision 0,001 mm over NC
